Skip to main content
To KTH's start page

An Integrated Mechanical Vapor Recompression heat pump-dryer unit for Gypsum board drying Process (MVR4G-DRY)

This project aims to demonstrate decarbonization and electrification of Swedish building material industry with means of Mechanical Vapor Recompression (MVR) heat pump, disseminate findings, and support (HTPH) technology development together with Swedish manufacturers. Given the fact that Swedish industry contributes to the biggest share of CO2, the importance of electrification, decarbonization and increased resilience is of highest importance.

This project is funded within 2025 funding call of Pilot and demonstration program, contributing to decarbonization of Swedish industry funded by the Swedish Energy Agency.

Funding Agency: Swedish Energy Agency

Swedish title: En Integrerad MVR-värmepump för Gipsskivetork

Project acronym: MVR4G-DRY

Project logo

Project Number: P2025-00398

Time period: 2025-09-01 – 2028-06-01

Project partners:  Gyptech AB  (PI), KTH , RISE  and Knauf Sverige Gmbh

Partners logos

Background

The drying sector is one of the most energy-intensive industrial processes, consuming between 13 and 35 TWh annually in Sweden. Drying is a crucial step in gypsum board production, where the manufacturing of a single board requires approximately 8 kWh/m² (equivalent to 24 kWh for a standard 3 m² board) and drying accounts of 67% of the total energy demand.

Currently, natural gas burners are the predominant technology for supplying heat in gypsum board dryers. While effective, this approach leads to high CO₂ emissions and results in a significant amount of high-temperature waste heat. High-temperature heat pumps (HTHPs) can play a significant role in reducing the internal waste heat and replace fossil fuel and electrically driven boilers in different industrial heat treatment and drying processes. The choice of low Global Warming Potential (GWP), zero Ozone Depletion Potential (ODP) and low trifluoroacetic acid yield (TFA) refrigerant for high temperature applications is of highest importance.

Åhus on the map

The MVR4G-DRY project in Åhus (Skåne region) aims to replace conventional gas burners with highly efficient heat pump technology, capable of utilizing the available waste heat as a heat source. The 10.5 MWth MVR4G-DRY system employs water/steam as an eco-friendly refrigerant and delivers different levels of temperatures with a maximum of 210°C. The project consortium includes GYPTECH AB, Knauf Sverige GmbH, RISE, and KTH.

Fig. 1 Pilot and Demonstration site location.

This transition contributes directly to about 0.5% of Sweden's 2030 national emission reduction targets.

Aim and Objectives

Theprimary goal of the project is to develop a system prototype that integrates an existing gypsum board dryer at the Knauf Sweden factory in Åhus, Sweden, with an innovative, large-capacity MVR developed by Gyptech AB for the Swedish industrial market, addressing a critical technological gap and advancing energy-efficient industrial solutions.

Integrated dryer

Fig. 2 Integrated dryer with MVR system solution (Gyptech AB).

The main objectives are:

  • Design, optimize, and deliver a fully integrated MVR-dryer system in Åhus.

  • Advance the MVR4G-DRY system from TRL6 to TRL8.

  • Implement a real-time monitoring system to track key performance indicators, such as energy savings and carbon footprint reduction.

  • Disseminate the result internationally among a wide range of industries, stakeholders, researchers, professionals, and heat pump manufacturers.

  • Collaborate with Swedish industry

Group of people visiting Åhus

Fig.3 KTH, RISE, Gyptech and Knauf team in Åhus.

Publications

Coming soon

Contact people

Gyptech Team:

Robert Råhlin  , Project manager, Principal Investigator

Oskar Jonsson, Process Engineering Manager

Henrik Tryggeson, Process Engineer

Arvid Johannisson, Process Engineer and industrial PhD student (KTH)

KTH Team:

KTH Project leader

Monika Ignatowicz
Monika Ignatowicz research engineer
Samer Sawalha
Samer Sawalha associate professor
Rahmatollah Khodabandeh
Rahmatollah Khodabandeh professor

RISE Team:

Metkel Yebiyo , Doctor - RISE Project Leader 

Knauf Sverige GmbH Åhus:

Robin Sundius , Production Improvement Manager 

Innovative Digitalised Services for Future Heat Pump Systems
An Integrated Mechanical Vapor Recompression heat pump-dryer unit for Gypsum board drying Process (MVR4G-DRY)
EcoPack 3
DOCENT – Development of Occupant-centric Control for ENergy efficienT buildings
BESSFlex - Building Energy Systems and Storage for Flexible Sector Coupling
SPORT-RENOV: Innovative approaches for renovating sport facilities in Europe
Environmentally friendly lubricants for high temperature heat pumps with low GWP refrigerants
Under the Dome: An Educational Journey into Urban Energy Solutions
LABS – LABoratory Scale model for Borehole Thermal Energy Storage
Recovery of waste heat from base stations in the mobile network
Experimental investigations to maximize efficiency of CO2 vapor compression systems
Sustainable Geothermal Energy for the Future: AI in ATES
Warm water systems, losses and Legionella
PARMENIDES – Plug & plAy EneRgy ManagEmeNt for hybriD Energy Storage
HYSTORE - Hybrid services from advanced thermal energy storage systems
Open-source models for holistic building energy system design at scale (Completed)
Tank to Grave Management of new Low-GWP Refrigerants (Hantering av nya låg-GWP köldmedier från installation till destruktion)
Novel tool and guidelines for designing ground source heat pumps (GSHPs) in densely populated areas
Data driven lab for building energy systems
Long-term performance measurement of GSHP systems serving commercial, institutional and multi-family buildings
Open-source models for holistic building energy system design at scale
Control systems for hybrid solutions based on biomass fueled Stirling engines, solar and wind for rural electrification
Prosumer-Centric Communication for Solar PV Diffusion (completed)
Towards Sustainable (Fossil-free) Heating System in Small Residential Buildings
Solar energy and ground source heat pumps for Swedish multi-family housing (completed)
Solar photovoltaic systems in Swedish cooperative housing (completed)
Smart Control Strategies for Heat Pump Systems (completed)
Creating and Understanding Smart Innovation in Cities
Building heating solutions in China
Accelerating innovation in buildings
High-Resolution GIS District Heating Source-Load Mapping
Digitalization and IoT technologies for Heat Pump systems
Sustainable combined systems for heating of buildings (completed)
Cost- and Energy-Efficient Control Systems for Buildings
Situation of Opportunity in the Growth and Change of three Stockholm City Districts (completed)
Wuxi Sino-Swedish Eco-City Project (completed)
Smart Renovation Strategies for Sustainable Electrification
Future Secondary Fluids for indirect refrigeration systems
Smart Fault Detection and Diagnosis for Heat Pumps
Performance indicators for energy efficient supermarket buildings
Magnetic Refrigeration
High-Resolution GIS District Heating Source-Load Mapping
Smart Solar Hybrid Solutions for Sustainable European Buildings (completed)
Building state-of-the-art (SotA) supermarket: Putting theory into practice
Efficient utilization of industrial waste heat by low temperature heat driven power cycles – an integrated approach for Swedish Industry
Cooperation between Supermarkets and Real Estate Owners; Energy Efficiency and Business Models
Digitalization and IoT technologies for Heat Pump systems
Capacity control in Heat Pump systems
Alternative secondary fluids
Functional surface coatings for energy efficient heat pumps
Two-phase flow in flat channels
Two phase heat transfer & pressure drop with new environment friendly refrigerants in minichannels (completed)
Numerical Study on flow boiling in micro/mini channels (completed)
Distributed Cold Storages in District Cooling
Integrating Latent Heat Storage into Residential Heating Systems
Simulation of temperature distribution in borehole thermal storages supported by fiber optic temperature measurements (completed)
Solar energy and ground source heat pumps for Swedish multi-family housing (completed)
Neutrons for Heat Storage, NHS, (completed)
4D Monitoring of BTES (completed)
Aquifer Thermal Energy Storage (completed)
Deep Borehole Heat Exchanger (completed)
Combined Heat and Power plants in combination with borehole thermal energy storage (completed)
Improved borehole technology for Geothermal Heat Pumps development (completed)
Compact Minichannel Latent Energy Storage for Air Related Cold Storage Applications
Building heating solutions in China
Toward Sustainable (Fossil-free) Heating System in Small Residential Buildings
Renewable Energy Park, RE-Park (completed)
Efficient use of energy wells for heat pumps (completed)
Efficient design of geothermal heating systems (completed)
SPF (completed)