Publications by the divistion of Heat and Power
S. N. Gunasekara et al., "Thermal conductivity measurement of erythritol, xylitol, and their blends for phase change material design : A methodological study," International journal of energy research (Print), vol. 43, no. 5, pp. 1785-1801, 2019.
M. Afzal, "Semiconductor-ionic Materials for Low Temperature Solid Oxide Fuel Cells," Doctoral thesis Stockholm, Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2019:7, 2019.
R. Abeywecra et al., "A Remote Mode High Quality International Master Degree Program in Environomical Pathways for Sustainable Energy Systems (SELECT) -Pilot Program Experiences During First Year of Studies," in PROCEEDINGS OF 2018 IEEE GLOBAL ENGINEERING EDUCATION CONFERENCE (EDUCON) - EMERGING TRENDS AND CHALLENGES OF ENGINEERING EDUCATION, 2018, pp. 276-284.
U. G. Kithsiri et al., "A Remote Mode Master Degree Program in Sustainable Energy Engineering : Student Perception and Future Direction," in 20th International Conference on Interactive Collaborative Learning, ICL 2017, 2018, pp. 673-683.
G. T. Ayele et al., "An extended energy hub approach for load flow analysis of highly coupled district energy networks: Illustration with electricity and heating," Applied Energy, vol. 212, pp. 850-867, 2018.
A. Abdi, V. Martin and J. N. Chiu, "Numerical investigation of melting in a cavity with vertically oriented fins," Applied Energy, vol. 235, pp. 1027-1040, 2019.
J. Garrido et al., "Experimental and numerical performance analyses of Dish-Stirling cavity receivers : Radiative property study and design," Energy, vol. 169, pp. 478-488, 2019.
M. Wegener et al., "3E-Analysis of a Bio-Solar CCHP System for theAndaman Islands, India—A Case Study," Energies, vol. 12, no. 6, 2019.
M. Gutierrez et al., "A Mistuned Forced Response Analysis of an Embedded Compressor Blisk Using a Reduced-Order Model," Journal of engineering for gas turbines and power, vol. 141, no. 3, 2019.
T. Sun et al., "Influence of the Tip Clearance on the Aeroelastic Characteristics of a Last Stage Steam Turbine," Applied Sciences, vol. 9, no. 6, 2019.
E. D. Birru, "Process Utility Performance Evaluation and Enhancements in the Traditional Sugar Cane Industry," Doctoral thesis : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2019:21, 2019.
O. BLANCO FERNÁNDEZ, "Analysis and Dimensioning of a Large Scale Solar Cooking System : A solution for the Base of the Pyramid Market," , 2018.
V. G. Kutcherov and A. S. Lopatin, "Properties and phase behavior of Shtokman gas condensate at high pressure," Petroleum science and technology, vol. 37, no. 9, pp. 1099-1105, 2019.
G. Lorenzi et al., "Life cycle assessment of biogas upgrading routes," in Innovative Solutions for Energy Transitions, 2019, pp. 2012-2018.
D. Parigi et al., "Power-to-fuels through carbon dioxide Re-Utilization and high-temperature electrolysis : A technical and economical comparison between synthetic methanol and methane," Journal of Cleaner Production, vol. 226, pp. 679-691, 2019.
C. Xia et al., "Shaping triple-conducting semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-delta into an electrolyte for low-temperature solid oxide fuel cells," Nature Communications, vol. 10, 2019.
M. MosayebNezhad et al., "Technology review and thermodynamic performance study of a biogas-fed micro humid air turbine," Renewable energy, vol. 140, pp. 407-418, 2019.
X.-F. Shao et al., "Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature thermal energy storage. (II) : Isothermal melting and crystallization behaviors," Energy, vol. 180, pp. 572-583, 2019.
E. Wikberg, "Catalytic Upgrading of Fast Pyrolysis Bio-oil Using Zeolites," , 2019.
E. Cardozo and A. Malmquist, "Performance comparison between the use of wood and sugarcane bagasse pellets in a Stirling engine micro-CHP system," Applied Thermal Engineering, vol. 159, 2019.
P. M. Claesson et al., "Surface Nanomechanics of Coatings and Hydrogels," in IOP Conference Series : Materials Science and Engineering, 2019.
G. T. Ayele et al., "Optimal placement and sizing of heat pumps and heat only boilers in a coupled electricity and heating networks," Energy, vol. 182, pp. 122-134, 2019.
A. Yu. Serovaiskii, A. Yu. Kolesnikov and V. G. Kutcherov, "Formation of Iron Hydride and Iron Carbide from Hydrocarbon Systems at Ultra-High Thermobaric Conditions," Geochemistry International, vol. 57, no. 9, pp. 1008-1014, 2019.
J. Jazzar, "Methods of post-treatment of aerodynamic tests of engine boosters," , 2019.
G. T. Ayele et al., "Exergy analysis and thermo-economic optimization of a district heating network with solar- photovoltaic and heat pumps," in Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2019.
R. L. J. Samee Lal, "Thermal gas radiation modelling for CFD simulation of rocket thrust chamber," , 2019.
S. Trevisan, R. Guédez and B. Laumert, "Preliminary assessment of integration of a packed bed thermal energy storage in a Stirling - CSP system," in SolarPACES 2018 : International Conference on Concentrating Solar Power and Chemical Energy Systems, 2019.
T. Sun et al., "Detached-Eddy Simulation Applied to Aeroelastic Stability Analysis in a Last-Stage Steam Turbine Blade," Journal of turbomachinery, vol. 141, no. 9, 2019.
T. Nevzorova and V. G. Kutcherov, "Barriers to the wider implementation of biogas as a source of energy: A state-of-the-art review," Energy Strategy Reviews, vol. 26, pp. 100414, 2019.
V. G. Gkoutzamanis et al., "Thermal energy storage in combined cycle power plants : Comparing finite volume to finite element methods," in E3S Web of Conferences : SUPEHR19 Sustainable PolyEnergy generation and Harvesting, 2019.
S. Thantla et al., "Characterization of an organic Rankine cycle system for waste heat recovery from heavy-duty engine coolant and exhaust," in 5th International symposium on ORC power systems, 9 – 11 September 2019, Athens, 2019.
J. Garrido, R. Sjöqvist and B. Laumert, "Mechanical coupling behavior of a dish-Stirling receiver : Influence on the absorber tube stresses," in AIP Conference Proceedings, 2019.
Y. Benmakhlouf et al., "A methodology to assess the market potential and identify most promising business cases for small scale CSP plants with thermal energy storage," in AIP Conference Proceedings, 2019.
S. Trevisan et al., "Initial design of a radial-flow high temperature thermal energy storage concept for air-driven CSP systems," in AIP Conference Proceedings, 2019.
V. Gkoutzamanis et al., "Thermal energy storage in combined cycle power plants : Comparing finite volume to finite element methods," in E3S Web of Conferences, 2019.
M. Arnaudo et al., "Heat demand peak shaving in urban integrated energy systems by demand side management - A techno-economic and environmental approach," Energy, vol. 186, 2019.
N. Mushtaq et al., "Tuning the Energy Band Structure at Interfaces of the SrFe0.75Ti0.25O3-delta-Sm0.25Ce0.75O2-delta Heterostructure for Fast Ionic Transport," ACS Applied Materials and Interfaces, vol. 11, no. 42, pp. 38737-38745, 2019.
M. A. K. Y. Shah et al., "The semiconductor SrFe0.2Ti0.8O3-delta-ZnO heterostructure electrolyte fuel cells," International journal of hydrogen energy, vol. 44, no. 57, pp. 30319-30327, 2019.
A. Sorce et al., "Analysis of a combined cycle exploiting inlet conditioning technologies for power modulation," in Proceedings of the ASME Turbo Expo : Turbomachinery Technical Conference and Exposition, 2019, Vol 3, 2019.
R. Guedez et al., "Techno-economic comparative analysis of innovative combined cycle power plant layouts integrated with heat pumps and thermal energy storage," in Proceedings of the ASME Turbo Expo : Turbomachinery Technical Conference and Exposition, 2019, Vol 3, 2019.
T. Xu et al., "Thermal behavior of a sodium acetate trihydrate-based PCM : T-history and full-scale tests," Applied Energy, vol. 261, 2020.
J. Garrido Gálvez, "Solar cavity receiver design for a dish-Stirling system," Doctoral thesis Stockholm, Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2020:2, 2020.