Publikationer från avdelningen för Kraft- och värmeteknologi
M. Afzal, "Semiconductor-ionic Materials for Low Temperature Solid Oxide Fuel Cells," Doktorsavhandling Stockholm, Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2019:7, 2019.
A. Abdi, V. Martin och J. N. Chiu, "Numerical investigation of melting in a cavity with vertically oriented fins," Applied Energy, vol. 235, s. 1027-1040, 2019.
J. Garrido et al., "Experimental and numerical performance analyses of Dish-Stirling cavity receivers : Radiative property study and design," Energy, vol. 169, s. 478-488, 2019.
M. Wegener et al., "3E-Analysis of a Bio-Solar CCHP System for theAndaman Islands, India—A Case Study," Energies, vol. 12, no. 6, 2019.
M. Gutierrez et al., "A Mistuned Forced Response Analysis of an Embedded Compressor Blisk Using a Reduced-Order Model," Journal of engineering for gas turbines and power, vol. 141, no. 3, 2019.
T. Sun et al., "Influence of the Tip Clearance on the Aeroelastic Characteristics of a Last Stage Steam Turbine," Applied Sciences, vol. 9, no. 6, 2019.
E. D. Birru, "Process Utility Performance Evaluation and Enhancements in the Traditional Sugar Cane Industry," Doktorsavhandling : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2019:21, 2019.
V. G. Kutcherov och A. S. Lopatin, "Properties and phase behavior of Shtokman gas condensate at high pressure," Petroleum science and technology, vol. 37, no. 9, s. 1099-1105, 2019.
G. Lorenzi et al., "Life cycle assessment of biogas upgrading routes," i Innovative Solutions for Energy Transitions, 2019, s. 2012-2018.
D. Parigi et al., "Power-to-fuels through carbon dioxide Re-Utilization and high-temperature electrolysis : A technical and economical comparison between synthetic methanol and methane," Journal of Cleaner Production, vol. 226, s. 679-691, 2019.
C. Xia et al., "Shaping triple-conducting semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-delta into an electrolyte for low-temperature solid oxide fuel cells," Nature Communications, vol. 10, 2019.
X.-F. Shao et al., "Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature thermal energy storage. (II) : Isothermal melting and crystallization behaviors," Energy, vol. 180, s. 572-583, 2019.
E. Wikberg, "Catalytic Upgrading of Fast Pyrolysis Bio-oil Using Zeolites," , 2019.
E. Cardozo och A. Malmquist, "Performance comparison between the use of wood and sugarcane bagasse pellets in a Stirling engine micro-CHP system," Applied Thermal Engineering, vol. 159, 2019.
P. M. Claesson et al., "Surface Nanomechanics of Coatings and Hydrogels," i IOP Conference Series : Materials Science and Engineering, 2019.
G. T. Ayele et al., "Optimal placement and sizing of heat pumps and heat only boilers in a coupled electricity and heating networks," Energy, vol. 182, s. 122-134, 2019.
A. Yu. Serovaiskii, A. Yu. Kolesnikov och V. G. Kutcherov, "Formation of Iron Hydride and Iron Carbide from Hydrocarbon Systems at Ultra-High Thermobaric Conditions," Geochemistry International, vol. 57, no. 9, s. 1008-1014, 2019.
J. Jazzar, "Methods of post-treatment of aerodynamic tests of engine boosters," , 2019.
G. T. Ayele et al., "Exergy analysis and thermo-economic optimization of a district heating network with solar- photovoltaic and heat pumps," i Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2019.
S. Trevisan, R. Guédez och B. Laumert, "Preliminary assessment of integration of a packed bed thermal energy storage in a Stirling - CSP system," i SolarPACES 2018 : International Conference on Concentrating Solar Power and Chemical Energy Systems, 2019.
T. Sun et al., "Detached-Eddy Simulation Applied to Aeroelastic Stability Analysis in a Last-Stage Steam Turbine Blade," Journal of turbomachinery, vol. 141, no. 9, 2019.
T. Nevzorova och V. G. Kutcherov, "Barriers to the wider implementation of biogas as a source of energy: A state-of-the-art review," Energy Strategy Reviews, vol. 26, s. 100414, 2019.
S. Thantla et al., "Characterization of an organic Rankine cycle system for waste heat recovery from heavy-duty engine coolant and exhaust," i 5th International symposium on ORC power systems, 9 – 11 September 2019, Athens, 2019.
J. Garrido, R. Sjöqvist och B. Laumert, "Mechanical coupling behavior of a dish-Stirling receiver : Influence on the absorber tube stresses," i AIP Conference Proceedings, 2019.
Y. Benmakhlouf et al., "A methodology to assess the market potential and identify most promising business cases for small scale CSP plants with thermal energy storage," i AIP Conference Proceedings, 2019.
S. Trevisan et al., "Initial design of a radial-flow high temperature thermal energy storage concept for air-driven CSP systems," i AIP Conference Proceedings, 2019.
M. Arnaudo et al., "Heat demand peak shaving in urban integrated energy systems by demand side management - A techno-economic and environmental approach," Energy, vol. 186, 2019.
A. Sorce et al., "Analysis of a combined cycle exploiting inlet conditioning technologies for power modulation," i Proceedings of the ASME Turbo Expo : Turbomachinery Technical Conference and Exposition, 2019, Vol 3, 2019.
T. Xu et al., "Thermal behavior of a sodium acetate trihydrate-based PCM : T-history and full-scale tests," Applied Energy, vol. 261, 2020.
J. Garrido Gálvez, "Solar cavity receiver design for a dish-Stirling system," Doktorsavhandling Stockholm, Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2020:2, 2020.
D. Kudryavtsev et al., "High-pressure chemistry of propane," Minerals, 2020.
D. Kudryavtsev et al., "Raman Spectroscopy Study on Chemical Transformations of Propane at High Temperatures and High Pressures," Scientific Reports, vol. 10, no. 1483, 2020.
D. Kudryavtsev, "The role of deep hydrocarbons in the global hydrocarbon budget," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2020:4, 2020.
M. Gandiglio et al., "Solutions for improving the energy efficiency in wastewater treatment plants based on solid oxide fuel cell technology," Journal of Cleaner Production, vol. 247, 2020.
I. V. Kazachkov, "On the Modeling of Non-Classical Problems Involving Liquid Jets and Films and Related Heat Transfer Processes," Fluid Dynamics & Materials Processing, vol. 15, no. 5, s. 491-507, 2019.
M. Arnaudo, M. Topel och B. Laumert, "Techno-economic analysis of demand side flexibility to enable the integration of distributed heat pumps within a Swedish neighborhood," Energy, vol. 195, 2020.
Y. Gao et al., "FORCED RESPONSE ANALYSIS OF A RADIAL TURBINE WITH DIFFERENT MODELLING METHODS," i PROCEEDINGS OF THE ASME TURBO EXPO : TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 7A, 2019.
J. T. M. Horwood et al., "FLOW INSTABILITIES IN GAS TURBINE CHUTE SEALS," i PROCEEDINGS OF THE ASME TURBO EXPO : TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5B, 2019.
S. A. D. M. Watrin, "Integration of renewable energy storage into wind power plants in France," , 2020.
S. Trevisan, R. Guédez och B. Laumert, "Supercritical CO2 Brayton Power Cycle for CSP With Packed Bed TES Integration and Cost Benchmark Evaluation," i Proceedings ASME 2019 Power Conference, 2019.
J. Villarroel-Schneider et al., "Biogas based polygeneration plant options utilizing dairy farms waste : A Bolivian case," Sustainable Energy Technologies and Assessments, vol. 37, 2020.
M. Wegener et al., "How much does it cost to go off-grid with renewables? : A case study of a polygeneration system for a neighbourhood in hermosillo, Mexico," i 11th International Conference on Sustainability and Energy in Buildings, SEB 2019, 2020, s. 395-405.