Skip to main content
To KTH's start page

Completed master's theses at HPT

Completed master's theses at the Division of Heat and Power Technology

[1]
N. Wang, "2D CFD investigation of diagonal flow and thermal stratification in a packed-bed PCM thermal storage tank," , 2026.
[2]
M. Lopez, "Aerodynamic Effects of AM Roughness: Baseline Wind Tunnel Validation and Computational Analysis," , 2026.
[3]
L. Chen, "AI-Driven Permafrost Mapping Using Airborne Electromagnetic Data in Yukon, Canada," , 2026.
[4]
F. Labor, "Assessing Reliability, Robustness, and Redundancy in Electrified Timber Transport: A Swedish Case Study Using an Exploratory Route-Optimization Approach," , 2026.
[5]
Y. Zhang, "Circular Process Optimization for Cellulose-based Membrane Production: An Integrated Material–Energy Flow and scenario-based Sustainability Assessment, A Case study of Cellfion," , 2026.
[6]
S. Cuzzi, "Computational Framework for Screening Storable Liquid Bipropellants in Rocket Propulsion," , 2026.
[7]
A. Ioannidis, "Decarbonisation Pathways for a Greek Ceramic Manufacturer: A Case Study of KEBE SA," , 2026.
[8]
M. Ledesma Ruiz, "Decarbonization Strategy for an Italian District Heating Network : A techno-economical analysis for different regulatory scenarios," , 2026.
[9]
J. N. Janovs, "Decentralized vs. Centralized Electrification of Industrial Process Heat : A Techno-Economic Case Study," , 2026.
[10]
D. Iseborn, "Design Optimization of Heat Pump Impellers for Sustainable Refrigerants," , 2026.
[11]
F. Li, "Development of a battery management system simulation tool," , 2026.
[12]
T. Hermansson, "Dynamic regulation of hydropower minimum flow using camera based fish detection," , 2026.
[13]
A. Porcel, "From pressurized water reactors to sodium fast reactors : A multicriteria roadmap for closing France’s nuclear fuel cycle," , 2026.
[14]
J. E. Yeung, "Harnessing AI and Data Science for the Digital Transformation of Renewable Energy Systems," , 2026.
[15]
H. Huang, "Intelligent Energy Management of Multi-Energy Microgrids Considering Power-to-Ammonia via Reinforcement Learning," , 2026.
[16]
P. A. Purwanto, "Investigation of Process-Driven Flexibility in a Kraft Pulp Mill : Process Flexibility and Techno-Economic Assessment," , 2026.
[17]
S. O. Çadırcı, "Investigation of usage of different methane fuel qualities for rocket engines with respect to pyrolysis stability : Effects of ethane, propane and carbon dioxide," , 2026.
[18]
R. A. Mendoza Chávez, "Levelized Cost of Hydrogen Optimization under RFNBO Compliance - A scenario-based analysis of Hydrogen + BESS flexibility in the Swedish Electricity Market," , 2026.
[19]
P. Monzón Honrubia, "Life Cycle Assessment of a Hybrid Bioenergy and Thermal Storage System for a Bio-Circular Economy," , 2026.
[20]
N. Mare and J. Stolt, "Modeling of heat propagation in Advanced Geothermal Systems : A study of near-wellbore heat fluxes in deep crystalline rock using finite differences and semi-analytical solutions," , 2026.
[21]
A. Sivaprasadan, "Numerical Investigation of Steady-State Thermo-Fluid Performance of a Reducer for a High-Temperature Dynamic Pressure Sensor Calibration Rig : Minimizing Heat Loss and Pressure Loss in a Combustion-Dynamics Calibration Rig," , 2026.
[22]
D. García García, "Numerical Modelling of Thermal Storage Tanks with Phase Change Materials : Application of grey-box, hybrid, and machine learning approaches on experimental data," , 2026.
[23]
D. S. Cabeza De Vaca Gómez and F. J. Escoto Cálix, "Powering Water - Design and Techno–Economic Analysis of a Hybrid–Powered Water Treatment and Distribution System for Pomene, Mozambique," , 2026.
[24]
N. P. Herman, "Scenario-based Life Cycle Assessment of Palm Oil Biodiesel Production in Indonesia: Identifying key influencing factors and uncertainty," , 2026.
[25]
T. IDJOUADIENE, "Study of the coupling of a hydrogen fuel cell and a gas turbine in a regional aircraft," , 2026.
[26]
L. Abrahamsson, "Unlocking Wind Power Flexibility : Participation Barriers, Industrial Imbalance Costs and Economic Potential in SE1," , 2026.
[27]
J. Song, "Vibration and Acoustic Analysis of Permanent Magnet Synchronous Motors," , 2026.
[28]
A. Henningsson and A. Löfgren, "Waste Heat Recovery Potential in Jet Engines using Thermoelectric Generators : A Feasibility Study on Energy Harvesting through Application of Thermoelectric Generators," , 2026.
[29]
T. Lönnqvist and W. Hauffe, "Where the Grid Ends: Techno-Economic Assessment and Community-Centered Design of a Renewable Energy Mini-Grid for Pomene, Mozambique," , 2026.
[30]
I. Mohamuud, "A Conceptual Analysis of Ammonia as a Sustainable Fuel," , 2025.
[31]
R. M. Vicente Ferreira, "A Tailored Approach to Energy Efficiency Audits in Nordic SMEs Incorporating a Genetic Algorithm : Applied in Case Studies with Industrial and Non-Industrial SMEs in Sweden and Denmark," , 2025.
[32]
D. Eck, "Accelerating Solar System Adoption in South Africa : The Role of Business Models in Rural Electrification," , 2025.
[33]
R. Bastien-Amaré, "Agrivoltaics in the context of apple trees in Limousin," , 2025.
[34]
D. Thery-Dupressoir, "Anticipation of Potential Trade-offs and Synergies between Energy and Water in the Context of the French Ecological Transition to 2050 : A Nexus Approach," , 2025.
[35]
F. Vlcan, "Assessing the Feasibility and Viability of Industrial Waste Heat Utilization for District Heating in Oskarshamn," , 2025.
[36]
P. R. Patil, "Bridging Design and Recycling: Improving Lithium-Ion Battery Recyclability in Portable Power Tools," , 2025.
[37]
S. Suresh, "Calendar and Cycling Aging Models of Li-ion Batteries : A comparative study to determine the suitable aging model for the battery installed at KTH Live-in lab," , 2025.
[38]
J. Bouchard, "Catalytic Reduction of CO₂ into Solid Carbon," , 2025.
[39]
C. Toqueboeuf, "Comparative Modeling And Validation Of Bifacial Gains In PV Power Plants," , 2025.
[40]
B. J. A. Chamorro Cuastuza, "Comparative Techno-economic Analysis of Electricity Supply Architectures for Green Methanol Production in France," , 2025.
[41]
K. VIJAYAKUMAR, "Data-Driven Framework for Soiling Detection and Cleaning Optimization in Photovoltaic Systems," , 2025.
[42]
S. Jaya Lal, "Decarbonization Pathways for Pulp and Paper Value Chain : An Emission-Centric Techno-Economic Assessment," , 2025.
[43]
M. A. Irshad Hussain, "Decarbonizing Heating at Municipal Wastewater Treatment Plants with Power-to-Heat : Techno-Economic and Environmental Evaluation of Heat Pumps and Electric Boilers," , 2025.
[44]
T. Enhörning, "Design and Optimization of a Containerized Small-Scale Polygeneration System for Emergency Camps : A Case Study in Nepal Kathmandu," , 2025.
[45]
A.-M. BAIAS, "Developing a Residential DemandModel for Whole System EnergyPlanning in Sweden," , 2025.
[46]
O. Stepaniuk, "Development and Analysis of Frangible Covers for Rocket Launch Canister," , 2025.
[47]
Z. Shang, "Development of AI-Based Data-Driven Aging Model for Li-Ion Batteries," , 2025.
[48]
M. Farhan, "Eco-Design Strategies for Sustainable Solvent Management in Pharmaceutical Manufacturing : A Framework Based on Environmental Lifecycle Assessment and Process Optimization at Sanofi," , 2025.
[49]
Z. Liu, "End-of-Life PV Panel Recycling Using Molten Zinc Chloride Pyrolysis Approach," , 2025.
[50]
Z. Liu, "End-of-Life PV Panel Recycling Using Molten Zinc ChloridePyrolysis Approac," , 2025.
Full list in the KTH publications portal