Till innehåll på sidan
Till KTH:s startsida Till KTH:s startsida

Optimizing Energy Performance in Existing Urban Building Stocks: A Comprehensive Analysis and Strategic Approach for Sustainable Operation

Background:

The world is currently facing a complex triad of challenges encompassing climate change resilience, energy security, and long-term sustainability. The existing stock of buildings significantly influences both the origins of these challenges and potential solutions [1]. This is due to the fact that, over the operational and maintenance lifespan of buildings, existing structures contribute to around 75% of greenhouse gas (GHG) emissions and energy consumption, while new buildings only constitute 25% of embodied emissions and energy utilization [2]. It shows that existing buildings can pose risks to both human health and the environment. A noteworthy approach to addressing these challenges involves a substantial reduction in energy demand from existing buildings, offering a cost-effective and efficient alternative solution [3]. This not only leads to improved health, well-being, and quality of life for occupants but also brings about additional benefits such as cost savings derived from reduced energy consumption and associated bills.

Objective:

This master's thesis aims to comprehensively evaluate the energy performance of an existing condominium association (BRF Resolutionen) in Stockholm, focusing on its connection to district heating and the integration of three heat pumps, heat exchangers for preheating cold air in space heating, and thermal storage systems. The primary objectives of the research are:

  • Conduct an in-depth analysis of the current energy performance and operational dynamics of the building stock, considering its utilization of district heating, heat pumps, heat exchangers, and thermal storage.
  • Systematically identify and evaluate potential areas for improvement in energy efficiency, cost reduction, and environmental impact within the existing building infrastructure.
  • Propose and develop an optimal operation strategy for the building stock. This includes determining the most effective utilization of heat pumps, optimal times for purchasing electricity, and the strategic use of district heating to minimize both cost and energy consumption.
  • Investigate opportunities for the integration of renewable energy sources where applicable, ensuring a holistic approach to sustainability and reduced reliance on conventional energy.
  • Conduct a comprehensive cost-benefit analysis to assess the economic viability of proposed improvements and optimal operation strategies, taking into account initial investments and long-term operational savings.
  • Consider the impact of proposed changes on occupant comfort and well-being, ensuring that any optimization strategies align with and enhance the overall quality of the indoor environment.

This research endeavors to provide actionable insights for stakeholders involved in the management of the building stock, offering tangible recommendations for optimizing energy use, reducing costs, and contributing to a more sustainable and resilient urban energy infrastructure.

Research Area

  • Building Energy Performance
  • Energy data analysis
  • Energy Optimization Strategies
  • Cost-Benefit Analysis

Learning outcomes:

  • Gain comprehensive knowledge of the components and functioning of building energy systems, including district heating, heat pumps, heat exchangers, and thermal storage.
  • Develop skills in conducting detailed assessments of the energy performance of existing building stocks, including the identification of energy consumption patterns and efficiency metrics.
  • Develop the ability to formulate and implement optimal operation strategies for buildings, considering factors such as heat pump utilization, electricity purchasing, and district heating usage.
  • Acquire skills in performing cost-benefit analyses to evaluate the economic feasibility of proposed improvements and strategies, considering both initial investments and long-term operational savings.

Deliverables/Outputs:

The main deliverables are a comprehensive written thesis document presenting the background, objectives, methodology, findings, and conclusions of the research. The report should highlight the assessment of the current energy performance of the building stock and outlining specific recommendations for improvements in energy efficiency, cost reduction, and environmental impact. Considering student’s motivation, supervisors support and encourage the student to publish findings in a conference and /or journal paper.

Prerequisites:

Energy and Environment, Data analysis, basic knowledge in material and energy flows analysis.

Duration:

6 months, start time: anytime soon (January 2024)

Examiner/Supervision/Partners:

Examiner:

Supervisors:

Gustaf Landahl, Senior Advisor, gustaf.landahl@gmail.com

Reference:

1. World Economic Forum (2022). Accelerating the Decarbonization of Buildings: The Net-Zero Carbon Cities Building Value Framework. https://www.weforum.org/reports/accelerating-the-decarbonization-of-buildings-the-net-zero-carbon-cities-building-value-framework. (July 2022).

2. World Green Building Council. (2021). WorldGBC Net Zero Carbon Buildings Commitment. https://www.worldgbc.org/sites/default/files/WorldGBC%20NZCB%20Commitment%20Introduction%20DG%20Lite%202021_PUBLICATION.pdf. (July 2022).

3. M.J. Kelly, Retrofitting the existing UK building stock Build. Res. Inf., 37 (2) (2009), pp. 196-200

Innehållsansvarig:Oxana Samoteeva
Tillhör: Energiteknik
Senast ändrad: 2023-11-28
Predictive model control design for a small-scale steam engine based multi-source CHP system
Solar hydrogen production by photocatalytic reforming of cellulose with concentrated sunlight
Circularity of batteries
Kartläggning och Optimering av kyla på KTH Campus
Improving energy efficiency within Swedish industry by integration of High Temperature Heat Pumps (HTHP)
Low-carbon Transport and Mobility in a Digital Society: Applying Smart City Concepts in Curitiba, Brazil 
Battery application in harbour environment
Hydrogen production using agro-industrial waste
Investigation of usage of different methane fuel qualities for rocket engines with respect to the pyrolysis stability
Experimental study on the effect of temperature and pressure on the stability of methane in rocket nozzle cooling channels
Empowering the Future: Innovating Sustainable Energy with Digital Heat Pump Solutions
Optimizing Energy Performance in Existing Urban Building Stocks: A Comprehensive Analysis and Strategic Approach for Sustainable Operation
Improving water circularity in steelmaking: Avesta Outokumpu case study
Characterization of the Large Areas Solar Simulator for PV/PVT testing
Development of Remote Battery Lab
Techno-economic and feasibility assessment for nuclear plants combination with CO2 sequestration and green fuels production units
Techno-economic and feasibility assessment for nuclear plants integration in flexible future energy systems for grid balancing and ancillary services
Carbon dioxide heat pump for heating properties
Analysis of Residual Resources
Life-cycle impact assessment of innovative cascade PCM based thermal energy storage solutions
Techno-economic assessment and optimization of seasonal thermal energy storage in district heating networks
Final Commissioning and Experimental Performance Characterization of a Bench-scale Thermochemical Heat Storage System (SEU/SPG)
Boiling inside rectangular microchannels: Investigating the use of high-speed IR camera for temperature readings
New Low-GWP Refrigerants Analysis with Gas Chromatography
Mapping the value of green roofs in Swedish cities
Kartläggning av vätgasproduktion hos Ovako
Renewables and Demand Side Management
Power consumption and CO2 emission of HTTP servers
Circularity measurement for automotive industries
Experimental Investigation of Optimal Flow in Borehole Heat Exchanger at KTH Live-in Lab
Safe use of flammable refrigerants-Modeling concentrations of the leaked refrigerants in case of accidental emissions in different scenarios
Safe use of flammable refrigerants-literature review
Low Global Warming Potential Refrigerants for high temperature heat pumps
Development of battery test rig: Remote Battery Lab
Comparative analysis of thermal storage options for industrial steam generation in a solar thermal integrated system
Development, Implementation & Evaluation of an optimized operation algorithm for a Li-Ion battery Energy Management System (EMS) at Tezpur University
Flexible Sector Coupling (FSC) of Electrical and Thermal Sectors via Thermal Energy Storage (TES) - A Case Study on Oskarshamn Energi
De-icing of trains in a Nordic climate
Reversable heat pumps with natural refrigerants
Calibration of a measurement system for methane pyrolysis detection in rocket nozzles
Experimental study on the effect of rocket nozzle wall materials on the stability of methane
Techno-economic assessment of a bioenergy driven Cogeneration system for rural applications
Examensarbete om vattenflöden för bostäder
Evaluating the potential of energy efficiency improvement in combined cycle power generation to minimize the CO2 footprint in the context of Sri Lanka
Smart and Sustainable Oskarshamn: Energy Management and urban system analysis
Aqueous ammonia in refrigeration applications
Photovoltaic system design, installation and performance evaluation: PV Lab test rig
Ground source heat pumps in densely populated areas - a techno-economic study
Replacement of old ground-source heat pumps – a techno-economic study
PV-ESS system optimization to maximize self-consumption of PV-generated in KTH live-in lab
Environmental assessment of SESS applications based on cradle to grave LCA
High and low temperature electrolysis integration in Combined Cycles
Novel solar technologies and SOEC integration for synthetic fuels
Digitalization of HVAC schema drawings
Experimental evaluation of advanced features of a modern heat pumping system
Development & implementation of an improved operation algorithm for a Li-Ion battery energy management system (EMS) at Tezpur University
Techno-economical analysis of large refrigeration systems - operational and maintenance strategies
Comparision of high fidelity and real-time CFD methods for simulating thermal comfort
Data driven heat pump models for generation of electrical load profiles at DSO level
Master thesis at Bosch Thermoteknik
Developing an integrated resource optimization model of a river basin in Kenya
Language Models for Policy Analysis at SEI
Enhancing Socio-Economic Impact Assessment in Climate-Compatible and Self-Sufficient Rural Communities through Integrated Resource Optimization Models
Climate impact of renovation projects in the built environment– zooming in on technical installations
Developing a spatial database for energy planning in Sweden
Developing a transport demand model for whole system energy planning in Sweden
Developing a residential demand model for whole system energy planning in Sweden
The use of artificial intelligence (AI) and life cycle analysis (LCA) tools for predicting the environmental performance of sustainable transport fuels
Towards Zero-Waste through a Circular Recovery Model – Lessons for Managing Municipal Solid Waste from Sweden and India
The role of renewable gases (ReNewGas) in the decarbonization of energy systems in the EU
Extracting insights from a Knowledge Graph of an ongoing research programme for Climate Compatible Growth
An approach to increase the effectiveness of use of modelling tools to inform climate-compatible development strategies in Low and Middle Income Countries
Land-based mitigation technologies, measures, and systems in negative emission pathways
Spatial analysis of district heating
Seasonal storages – way ahead for industrial decarbonisation?